Earth Rod

Ground Rods, Accessories

Threaded Copper-plated Earth Rod

LSP uses copperbond earth rods of a high quality which comply with even the most demanding r egulations in order to achieve long-lasting earthing. All these earth rods are electrolytically coated with copper which is 250 μm thick and 99.9% pure, with a proven resistance to corrosion. This type of electrolytic coating prevents cracks or fissures, which may be caused in the outer layer of the earth rods with mechanical coating.

Using the appropriate accessories, threaded copperbond earth rods enable the electrode to extend in order to obtain better earth resistances.


The electrodes should be placed at a depth of at least 50 cm.

It is preferable to use several conductors conveniently spread out rather than one very long conductor.

In the case of an earthing system made up of various interconnected electrodes, it is recommended that:

  • The buried earth rods must be placed in a triangle or line and spaced out at a distance of at least that of their buried depth.
  • The buried earth rods are connected by an identical or compatible conductor to the one used for the downconductor.
  • The conductor joining the earth r od should be buried at a depth of at least 50 cm.

Technical data

MaterialCopper-plated Steel
Diameter Ø (mm)16 (5/8”)
Length L (mm)1500
ShapeTwo threads
Unit Weight (kg)1.9


Other products in this category

Chemical Ground Electrode

Maintains a low ground resistance,Maintenance-free installation.

GEM Ground Enhancement

Ground Enhancement Material (GEM) is a superior conductive material.

Threaded Coupling

Type:COUPLING16; Material:Cooper.

Lightweight Inspection Pit

The earth pit weighs only 1.8kg,High load-bearing capacity up to 5,000kg.



Used for Equipotential Bonding


Isolating Spark Gaps TYP481

lsolating spark gaps with plastic coating and two stainless steel connections (Rd 12 mm).