SPDs for Telecommunication and Data  Networks

RJ45S-E100

Data cable protection device for data technology, e.g. Ethernet network systems, Twisted Pair and control circuits. The two-level protection circuit permits transmission frequencies of up to 155 MHz. The protection devices are mounted in an aluminium housing with Sub RJ45 connector and can be mounted simply as an adapter connector. The supplied, 150 mm long connection cable allows rapid refitting.

Data cable protection device for information technology systems

  • In aluminium housing
  • RJ 45 Connector
  • Simple mounting using adapter plug
  • Two-stage protective circuit

Application: Twisted pair, control circuits, communication cables

LSP-Catalogue-Net-Defender-RJ45S-E100
Dimensions-Data-Defender-RJ45S-E100
Dimensions
basic-circuit-diagram-rj45s-e100
Basic circuit diagram

Technical data

TypeRJ45S-E100
SPD according to EN 61643-21 / IEC 61643-21type 2 / class II
Max. continuous operating a.c. voltage Uc4.2 V
Max. continuous operating d.c. voltage Uc5 V
Rated current IL100 mA
Lightning impulse current (10/350 μs) Iimp1 kA
C2 Nominal discharge current (8/20 μs) line-line In150 A
C2 Nominal discharge current (8/20 μs) line-PG In2.5 kA
Voltage protection level line-line for In C2 UP< 35 V
Voltage protection level line-PG for In C2 UP< 35 V
Voltage protection level line-line at 1 kV/μs C3 UP< 13 V
Cut-off frequency line-line at 100 ohms fG155 Mhz
Insertion loss at 100 MHz< 0.4 dB
Capacitance line-line (C)< 35 pF
Capacitance line-PG (C)< 50 pF
Range of operating temperatures (TU)-40/+80°C
Degree of protectionIP 20
Connection (input / output)RJ45 / RJ45
Pinning1/2, 3/6
Enclosure materialAluminum housing
Earthing viaConnecting line

Downloads:

Other products in this category


surge protection device ND-CAT-6A-EA

ND-CAT 6A/EA

It can be snapped directly onto the hat rail and uses it to create the necessary equipotential bonding. Alternatively, terminal protection using a separately connectable.

RJ11S-TELE

The data cable protection devices for telecommunications applications are available as combination protection and fine protection.

RJ45-E100

Protection devices are mounted in an aluminium housing with Sub RJ45 connector and can be mounted simply as an adapter connector.

RJ45-E100-8U

Protection devices are mounted in an aluminium housing with Sub RJ45 connector and can be mounted simply as an adapter connector.

RJ45-E100-16U

ADSL/PSTN surge protection;  RJ45 connector; 19″ inches rackmount

RJ45-E100-24U

ADSL/PSTN surge protection;  RJ45 connector; 19″ inches rackmount