Home  >  Products  >  DC SPDs  >  Type 2  >  SLP40-DC series  >  SLP40-DC95

Surge Arrester – Type 2

SLP40-DC95/2

SLP40-DC95/2S

Modular multipole surge arrester for use in PV systems with remote signalling contact for monitoring device (floating changeover contact)

  • Prewired modular complete unit for use in photovoltaic systems consisting of a base part and plug-in protection modules
  • Combined disconnection and short-circuiting device with safe electrical isolation in the protection module prevents fire damage caused by d.c. switching arcs
  • Safe replacement of protection modules without arc formation due to integrated d.c. fuse
Surge-protection-device-SLP40-DC95-2S
dimensions-slp40-dc95-2s
Dimensions
basic-circuit-diagram-slp40-dc95-2s
Basic circuit diagram

Technical data

TypeSLP40-DC95/2SLP40-DC95/2S
SPD according to EN 61643-11 / IEC 61643-11type 2 / class IItype 2 / class II
Nominal d.c. voltage Un95 V95 V
Max. continuous operating d.c. voltage Uc125 V125 V
Nominal discharge current (8/20μs) In20 kA20 kA
Maximum discharge current (8/20μs) Imax40 kA40 kA
Voltage Protection level UP0,45 kV0,45 kV
Residual current – Leakage current at Uc [IPE]< 0.1 mA< 0.1 mA
Max. Load current if connection series IL20 A20 A
Response time tA25 ns25 ns
Range of operating temperatures (TU)-40/+80°C-40/+80°C
Operating state / fault indicationgreen / redgreen / red
Number of ports11
Cross-sectional area (min.)1.5 mm2 solid /flexible1.5 mm2 solid /flexible
Cross-sectional area (max.)35 mm2 stranded / 25 mm2 flexible35 mm2 stranded / 25 mm2 flexible
For mounting on35 mm DIN rail acc. to EN 6071535 mm DIN rail acc. to EN 60715
Enclosure materialthermoplasticthermoplastic
Place of installationindoor installationindoor installation
Degree of protectionIP 20IP 20
Capacity2 module(s), DIN 438802 module(s), DIN 43880
Approvals
Type of remote signalling contactchangeover contact
a.c. switching capacity250 V / 0.5 A
d.c. switching capacity250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminalsmax. 1.5 mm2 solid / flexible

Downloads:

Other products in this category 


surge-arrester-slp40-dc12

SLP40-DC12

Un = 12 Vdc

Imax (8/20μs) = 40 kA

surge-arrester-slp40-dc24

SLP40-DC24

Un = 24 Vdc

Imax (8/20μs) = 40 kA

surge-arrester-slp40-dc48

SLP40-DC48

Un = 48 Vdc

Imax (8/20μs) = 40 kA

surge-arrester-slp40-dc12

SLP40-DC75

Un = 75 Vdc

Imax (8/20μs) = 40 kA

surge-arrester-slp40-dc12

SLP40-DC110

Un = 110 Vdc

Imax (8/20μs) = 40 kA

surge-arrester-slp40-dc12

SLP40-DC130

Un = 130 Vdc

Imax (8/20μs) = 40 kA