Home  >  Products  >  DC SPDs  >  Type 2  >  SLP40-PV series  >  SLP40-PV800/2S

Surge Arrester – Type 2

SLP40-PV800/2

SLP40-PV800/2S

Modular multipole surge arrester for use in PV systems with remote signalling contact for monitoring device (floating changeover contact)

  • Prewired modular complete unit for use in photovoltaic systems consisting of a base part and plug-in protection modules
  • Combined disconnection and short-circuiting device with safe electrical isolation in the protection module prevents fire damage caused by d.c. switching arcs
  • Safe replacement of protection modules without arc formation due to integrated d.c. fuse
surge-protective-device-slp40-pv800-2s
dimensions-slp40-pv800-2s
Dimensions
basic-circuit-diagram-slp40-pv800-2s
Basic circuit diagram

Technical data

TypeSLP40-PV800/2SLP40-PV800/2S
SPD according to EN 50539-11type 2type 2
Nominal voltage Unpv800 V800 V
Maximum operating voltage Ucpv960 V960 V
Nominal discharge current (8/20μs) In20 kA20 kA
Maximum discharge current (8/20μs) Imax40 kA40 kA
Voltage Protection level UP2 / 3,6 kV2 / 3,6 kV
Response time tA25 ns25 ns
Short-circuit current rating ISCPV1000 A1000 A
Range of operating temperatures (TU)-40/+80°C-40/+80°C
Operating state / fault indicationgreen / redgreen / red
Number of ports11
Cross-sectional area (min.)1.5 mm2 solid /flexible1.5 mm2 solid /flexible
Cross-sectional area (max.)35 mm2 stranded / 25 mm2 flexible35 mm2 stranded / 25 mm2 flexible
For mounting on35 mm DIN rail acc. to EN 6071535 mm DIN rail acc. to EN 60715
Enclosure materialthermoplasticthermoplastic
Place of installationindoor installationindoor installation
Degree of protectionIP 20IP 20
Capacity2 module(s), DIN 438802 module(s), DIN 43880
Approvals
Type of remote signalling contactchangeover contact
a.c. switching capacity250 V / 0.5 A
d.c. switching capacity250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminalsmax. 1.5 mm2 solid / flexible

Downloads:

Other products in this category 


surge-arrester-slp40-pv500-2s

SLP40-PV500/2S

Unpv = 500 Vdc

Imax (8/20μs) = 40 kA

surge-arrester-slp40-pv500-3s

SLP40-PV500/3S

Unpv = 500 Vdc

Imax (8/20μs) = 40 kA

surge-arrester-slp40-pv500-2s

SLP40-PV600/2S

Unpv = 600 Vdc

Imax (8/20μs) = 40 kA

surge-arrester-slp40-pv500-3s

SLP40-PV600/3S

Unpv = 600 Vdc

Imax (8/20μs) = 40 kA

surge-arrester-slp40-pv500-3s

SLP40-PV800/3S

Unpv = 800 Vdc

Imax (8/20μs) = 40 kA

surge-arrester-slp40-pv500-2s

SLP40-PV1000/2S

Unpv = 1000 Vdc

Imax (8/20μs) = 40 kA