About adminThis author has not yet filled in any details.
So far admin has created 77 blog entries.
Pluggable two-pole Type 3 T3 surge arrester DR M 2P IL=25A DEHNrail modular Two-pole surge arrester consisting of a [...]
Surge protection for 5G cell site (mobile base station) Protecting the power supply Avoid false tripping of systems fuses [...]
Disassembling DG M 275 ACI, for highest system availability - DEHNguard ACI DEHNguard M TT ACI 275 FM Modular [...]
Surge protective device SPD certified by TUV, CB, CE - LSP strategic cooperation with TUV Rheinland [...]
MOV Metal Oxide Varistor for surge protective device SPD - LSP cooperation with LKD In order to improve product quality, [...]
Examples of surge protective device SPD applications in 230-400 V systems, Terms and Definitions EMC lightning protection - zone [...]
Disassembling various brand T1+T2, Class B+C, Class I+II, Iimp 6.25kA, 12,5kA DC PV surge protective device SPD
Disassembling various brand T1+T2, Class B+C, Class I+II, Iimp 6.25kA, 12,5kA DC PV surge protective device SPD 1000Vdc 1200Vdc 1500Vdc [...]
Disassembling various brand T1+T2, Class B+C, Class I+II, Iimp 12,5kA surge protective device SPD 1. Dehn (Germany) 1) Dehn [...]
Disassembling various brand T1+T2, Class B+C, Class I+II, Iimp 25kA surge protective device SPD 1. Dehn (Germany) Dehn lightning [...]
Several hot issues in the present surge protective device SPD 1. Classification of test waveforms For the surge protective [...]
T1+T2 AC Surge Protective Device SPD for 40 mm busbar OBO-Bettermann T1+T2 AC Surge Protective Device SPD for 40 [...]
Free Download VDE 0675-6-11:2002-12 VDE 0675-6-11:2002-12 Parafoudres basse-tension - Partie 11: Parafoudres connectés aux systèmes de distribution basse tension [...]
Free Download IEC 61643-11 IEC 61643-11 Low-voltage surge protective devices – Part 11: Surge protective devices connected to low-voltage power [...]
Lightning current surge and overvoltage protection Overvoltage of atmospheric origin Overvoltage definitions Overvoltage (in a system) any voltage between [...]
Chinese surge protective devices (SPDs) mass-production based on Dehn, OBO, and Citel’s structural design. However, with the development of the technology and practice, the accumulation of mature product is constantly changing, such as Dehn, Phoenix, Raycap, OBO, Citel, Hakel, Saltek surge protector, always keep coming up with new styles and models. These changes not only do some fashionable change, differentiation, but there is a lot of the structure and function of the optimization. But look at most of China SPDs factories, they still use an outdated structural design such as OBO style
With the growing awareness of global warming and the limits to our fossil-based fuels, the need to find a better renewable source of energy is becoming apparent. The use of wind energy is a rapidly growing industry. LSP has a full suite of surge protection products available for wind turbine applications.
Increasing demand for 5G technology means that we need higher transmission capacities and better network availability. New cell site locations are constantly being developed for this purpose – the existing network infrastructure is being modified and expanded. There is no question about the fact that cell sites must be reliable. Nobody can or wants to risk their failure or restricted operation.
With the increasing proliferation of electric vehicles and the new “fast charging” technology, the need for reliable and safe charging infrastructure is also increasing. Both the actual charging devices and the connected vehicles themselves need to be protected against overvoltages, as both have sensitive electronic components.
Ethernet Surge Protector, PoE surge protection device parameters Testing (Part I) -- The basic concept of be confused 1. [...]
Solutions for Railways & Transportation Surge Protection Devices and Voltage Limiting Devices Why to protect? Protection of railway [...]
AC & PV Surge protection device SPD for PCB mounting Adaptable Base to PCB for Surge Protection Device SPD [...]
BS EN 62305-4:2011 Protection against lightning - Part 4 Electrical and electronic systems within structures. This European Standard supersedes EN 62305-4:2006+corr.Nov.2006.
BS EN 62305-3:2011 Protection against lightning-Part 3 Physical damage to structures and live hazard, This British Standard is the UK implementation of EN 62305-3:2011.
BS EN 62305-1:2011 Protection against lightning - Part 1 General principles, This European Standard supersedes EN 62305-1:2006+corr.Nov.2006.
EN 61643-21:2001+A2:2013 Low-voltage surge protective devices. It is derived from IEC 61643-21:2000, incorporating corrigendum March 2001 and amendment 2:2012. It supersedes BS EN 61643-21:2001+A1:2009, which is withdrawn.
India customer visits LSP for surge protection in power protection products, telecom & transmission towers & railways. LSP is glad to meeting two guests from India on Nov 6th, 2019, their company manufactures and supplies power conditioning instruments, automation, and energy management products.
BS EN 61643-11-2012+A11:2018 Low-voltage surge protective devices – Part 11 Surge protective devices conected to low-voltage power systems BS [...]
EN 50526-1-2012 & EN 50526-2-2014, Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices
BS EN 61643-31:2019 Low-voltage surge protective devices - Part 31 Requirements and test methods for SPDs for photovoltaic installations [...]
AC&DC surge protective device SPD manufacture – same quality as a European brand, for cost reduction, now you have a good choice for backup.
The arrival of the 18th Edition of the IET Wiring Regulations further reshapes the regulatory landscape for electrical contractors. Surge protection devices (SPDs) are designed to prevent electric shock and having excess voltage damaging the installation's wiring infrastructure.
How to choose China AC&DC&PV surge protective device SPD manufacturer, 8 important points of purchasing pluggable surge protective device from China
This Technical Specification was prepared by the Technical Committee CENELEC TC 37A, Low voltage surge protective devices. The text of the draft was submitted to the formal vote and was approved by CENELEC as CLC/TS 50539-12 on 2009-10-30.
This Technical Specification describes the principles for selection, location, coordination and operation of SPDs to be connected to PV installations. The d.c. side is rated up to 1500 V d.c. and the a.c. side, if any, is rated up to 1000 V rms 50 Hz.
The International Electrotechnical Commission (IEC) has released IEC 60364-7-712:2017 for “Low voltage electrical installations – Part 7-712: Requirements for special installations or locations – Solar photovoltaic (PV) power supply systems”.
The newly issued UL 1449 Standard for Surge Protective Devices for safety and is the preferred standard for all AC surge protection devices (SPDs).Requirements that cover surge protective devices (SPDs) designed for the repeated limiting of transient voltage surges as specified in the standard on 50 or 60 Hz power circuits not exceeding 1000 V.
Free download BS EN IEC Standards for Surge Protective Device (SPD). To development and production of surge protectors must comply with the latest industry standards for this product.
Three most famous brands in the field of the surge protection device in the world, Cross Reference with LSP DEHN [...]
Surge Protection Device for Led Street Lightings, LED technology has become the reference technology for lighting, mainly because of four characteristics: efficiency, versatility, energy savings and longer life. In spite of these benefits, the technology has a number of drawbacks: Higher cost of implementation (initial investment) and internal electronics (LED optics and drivers), much more complex and sensitive to overvoltages than in the case of traditional light sources.
EN 61643-11 & IEC 61643-21:2012 Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signaling networks – Performance requirements and testing methods
The protective wiring method in which the metal part of the electrical appliance (that is, the metal structural part insulated from the live part) which may be charged after the insulation material is damaged or in other cases is reliably connected by the conductor and the grounding body. The grounding protection system has only phase and neutral lines.
Lightning protection equipment is through modern electricity and other technology to prevent the equipment being struck by lightning. Lightning protection equipment can be divided into power lightning protection, power protection socket, antenna feeder protection, signal lightning protection, lightning protection testing tools, measurement, and control system lightning protection, earth pole protection.
Surge Protection Device SPD is also named arrester, All surge protectors for a specific purpose are actually a kind of rapid switch, and the surge protector is activated within a certain voltage range. After being activated, the suppression component of the surge protector will be disconnected from the high-impedance state, and the L pole will be turned into a low-resistance state.
Power over Ethernet (PoE) Surge Protector model ND-CAT 6A/EA is specifically designed to protect communication devices connected via Ethernet LAN from lightning surge entering through network cables.
The SCB (Surge Circuit Breaker) dedicated backup protector provides professional backup protection for the SPD (Lightning Protection Device) that protects the power supply.
Surge protective devices SPDs standards & literature DIN VDE 0100-100:2009-06 Low-voltage electrical istallations – Part 1: Fundamental principles, assessment [...]
Surge protection devices for industrial applications Industrial applications include various types of equipment that need to be protected from the [...]
Lightning and surge protection for rooftop photovoltaic systems At present, many PV systems are installed. Based on the fact [...]
Choice of Surge Protection Devices for Photovoltaic Applications General concept To achieve the complete functionality of a photovoltaic (PV) [...]
Surge Protection Devices are used for electric power supply networks Surge Protection Devices are used for electric power supply [...]
Summarize of lightning and surge protection devices Planned Safety Failure of technical installations and systems [...]
IEC 61643-31-2018 Requirements and test methods for photovoltaic IEC 61643-31: 2018 Low-voltage surge protective devices - Part 31: Requirements [...]
PV Surge Protection Device Solar Panel DC Surge Protective Device SPD Photovoltaic installations are key sources of renewable energy across [...]