BS EN 62305-4:2011 Protection against lightning - Part 4 Electrical and electronic systems within structures. This European Standard supersedes EN 62305-4:2006+corr.Nov.2006.
BS EN 62305-3:2011 Protection against lightning-Part 3 Physical damage to structures and live hazard, This British Standard is the UK implementation of EN 62305-3:2011.
BS EN 62305-1:2011 Protection against lightning - Part 1 General principles, This European Standard supersedes EN 62305-1:2006+corr.Nov.2006.
EN 61643-21:2001+A2:2013 Low-voltage surge protective devices. It is derived from IEC 61643-21:2000, incorporating corrigendum March 2001 and amendment 2:2012. It supersedes BS EN 61643-21:2001+A1:2009, which is withdrawn.
BS EN 61643-11-2012+A11:2018 Low-voltage surge protective devices – Part 11 Surge protective devices conected to low-voltage power systems BS [...]
EN 50526-1-2012 & EN 50526-2-2014, Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices
BS EN 61643-31:2019 Low-voltage surge protective devices - Part 31 Requirements and test methods for SPDs for photovoltaic installations [...]
The arrival of the 18th Edition of the IET Wiring Regulations further reshapes the regulatory landscape for electrical contractors. Surge protection devices (SPDs) are designed to prevent electric shock and having excess voltage damaging the installation's wiring infrastructure.
This Technical Specification was prepared by the Technical Committee CENELEC TC 37A, Low voltage surge protective devices. The text of the draft was submitted to the formal vote and was approved by CENELEC as CLC/TS 50539-12 on 2009-10-30.
This Technical Specification describes the principles for selection, location, coordination and operation of SPDs to be connected to PV installations. The d.c. side is rated up to 1500 V d.c. and the a.c. side, if any, is rated up to 1000 V rms 50 Hz.
The International Electrotechnical Commission (IEC) has released IEC 60364-7-712:2017 for “Low voltage electrical installations – Part 7-712: Requirements for special installations or locations – Solar photovoltaic (PV) power supply systems”.
The newly issued UL 1449 Standard for Surge Protective Devices for safety and is the preferred standard for all AC surge protection devices (SPDs).Requirements that cover surge protective devices (SPDs) designed for the repeated limiting of transient voltage surges as specified in the standard on 50 or 60 Hz power circuits not exceeding 1000 V.
Free download BS EN IEC Standards for Surge Protective Device (SPD). To development and production of surge protectors must comply with the latest industry standards for this product.
EN 61643-11 & IEC 61643-21:2012 Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signaling networks – Performance requirements and testing methods
Surge protective devices SPDs standards & literature DIN VDE 0100-100:2009-06 Low-voltage electrical istallations – Part 1: Fundamental principles, assessment [...]
IEC 61643-31-2018 Requirements and test methods for photovoltaic IEC 61643-31: 2018 Low-voltage surge protective devices - Part 31: Requirements [...]