Project Description
FLP50GR-385/3+1
Description
Integral housing coordinated lightning current and surge arrester for protecting three-phase TT and TN-S systems (“3+1” circuit) against surges.
- Coordinated spark-gap-based lightning current and surge arrester
- Maximum systems availability due to RADAX Flow follow current limitation
- Capable of protecting terminal equipment
Type | FLP50GR-385/3+1 |
SPD according to EN 61643-11 / IEC 61643-11 | type 1 / class I |
Nominal a.c. voltage (Un) | 230 / 400 V AC (50/60 Hz) |
Max. continuous operating a.c. voltage [L-N] (Uc) | 385 V AC (50/60 Hz) |
Max. continuous operating a.c. voltage [N-PE] (Uc (N-PE)) | 255 V AC (50/60 Hz) |
Lightning impulse current (10/350μs) [L1+L2+L3+N-PE] (Itotal) | 200 kA |
Specific energy [L1+L2+L3+N-PE] (W/R) | 2,5 MJ/ohms |
Lightning impulse current (10/350μs) [L-N]/[N-PE] (Iimp) | 50 kA / 100 kA |
Specific energy [L-N]/[N-PE] (W/R) | 625,00 kJ/ohms / 2,5 MJ/ohms |
Nominal discharge current (8/20μs) [L-N]/[N-PE] (In) | 50 kA / 100 kA |
Voltage protection level [L-N]/[N-PE] (Up) | 2,0 kV / 1,5 kV |
Follow current extinguishing capability a.c. (Ifi) | 50 kArms / 100 Arms |
Follow current limitation / Selectivity | no tripping of a 20 A gL/gG fuse up to 50 kArms (prosp.) |
Response time (tA) | < 100 ns |
Max. backup fuse (L) up to IK = 50 kArms (ta < 0,2 s) | 500 A gL/gG |
Max. backup fuse (L) up to IK = 50 kArms (ta < 5 s) | 315 A gL/gG |
Max. backup fuse (L) up to IK > 50 kArms | 200 A gL/gG |
Max. backup fuse (L-L’) | 125 A gL/gG |
Temporary overvoltage [L-N] (TOV) (UT) – Characteristic | 530 V / 120 min. – withstand |
Temporary overvoltage [N-PE] (TOV) (UT) – Characteristic | 1200 V / 200 ms. – withstand |
Range of operating temperatures [parallel] / [series] (TU) | -40…+80°C / -40…+60°C |
Operating state / fault indication | – |
Number of ports | 1 |
Cross-sectional area (L1, L1′, L2, L2′, L3, L3′, N, PE, PE’) (min.) | 10 mm2 solid /flexible |
Cross-sectional area (L1, L2, L3, N, PE) (max.) | 50 mm2 stranded / 35 mm2 flexible |
Cross-sectional area (L1′, L2′, L3′, PE’) (max.) | 35 mm2 stranded / 25 mm2 flexible |
For mounting on | 35 mm DIN rail acc. to EN 60715 |
Enclosure material | thermoplastic |
Place of installation | indoor installation |
Degree of protection | IP20 |
Capacity | 8 module(s), DIN 43880 |
Approvals | CE |