T1+T2 AC Surge Protective Device SPD for 40 mm busbar


OBO-Bettermann T1+T2 AC Surge Protective Device SPD for 40 mm busbar:

  • Combination arrestor, type 1+2, according to VDE 0675-6-11 (EN 61643-11)
  • Mounting on 40 mm busbars TN and TT system
  • Protection level ≤5 kV to protect terminals
  • Lightning protection equipotential bonding according to VDE 0185-305 (IEC 62305)
  • Fulfils the requirements of VDE 0100-534 (IEC 60364-5-53)
  • Follow current quenching capacity up to 50 kA and max. backup fuse up to 315 A gL/gG
  • Spark gaps for use in the pre-meter area according to VDE-AR-N 4100
  • Fulfils the requirements for use in the main power supply system in front of the meter

NAR = power-side connection compartment of the meter cabinet according to VDE-AR-N 4100: 2019-04

Surge protection for the power supply
Use at the supply point on the 40 mm busbar in the NAR

power-side connection compartment of the meter cabinet according to VDE-AR-N 4100 2019-04

NAR = power-side connection compartment according to VDE-AR-N 4100

Mounting on the 40 mm busbars before the eHz in the power-side connection compartment fulfills the requirements:
Surge protection at the supply point according to VDE 0100-443
Short connection cables according to VDE 0100-534
Visual display without power consumption according to VDE-AR-N 4100
Only 50 mm wide
Safety for the installation and sensitive terminals

T1+T2 AC Surge Protection Device SPD for 40 mm busbar (Surge protection for 40 mm rails)

Dehn:
Combined arrester for TT and TN-S systems for use in the main power supply system (3+1 configuration) of residential buildings with external lightning protection (class of LPS III/IV) including overcurrent-protected 230 V power supply for the compartment for additional applications/termination point meter mounting board according to VDE-AR-N 4100.

DEHNshield ZP

DEHNshield ZP, T1+T2 AC Surge Protective Device SPD for 40 mm busbar

DEHNshield ZP 2 SG TT 255 Part No. 909631

DEHNshield ZP 2 SG TT 255 Part No. 909631, T1+T2 AC Surge Protective Device SPD for 40 mm busbar

DEHNshield ZP 2 TT 255 Part No. 909531

DEHNshield ZP 2 TT 255 Part No. 909531, T1+T2 AC Surge Protective Device SPD for 40 mm busbar

Phoenix Contact T1+T2 AC Surge Protective Device SPD for 40 mm busbar:
Lightning arrester, in accordance with Type 1 / Class I, for 3-phase power supply networks, with separate N and PE (L1, L2, L3, PE, N). For lightning protection equipotential bonding in accordance with lightning protection levels III and IV. For mounting on 40 mm busbar systems.

Combination type – FLT-SEC-ZP-3S-255-12,5 Part No. 1032207

Raycap T1+T2 AC Surge Protective Device SPD for 40 mm busbar:
The ProTec ZPS T1H product family is specially designed for installations in front of the power meter on 40 mm busbar connection panels. The product’s simple and time-saving package eliminates most wire terminations and is easy to integrate into three-phase 40 mm busbar systems. The device is equipped with a state-of-the-art thermal disconnector and mechanically driven visual indicator system (green-red). In addition to the visual mechanical indicator, a remote contact (RC) features a three-pole remote signaling terminal to remotely monitor the operating state of the device. The surge arrester is designed to fully comply with the latest requirements of the German DIN VDE 0100-443 and 534 which regulate when and how low voltage systems need to be protected against overvoltages, and to DIN VDE AR-N 4100, the new technical connection rules for low voltage applications.

Raycap – ProTec ZPS T1H-300-3+1-R-L, ordering code 59.0911
Raycap – ProTec ZPS T1H-300-3+1-R, ordering code 59.0909

Raycap - ProTec ZPS T1H-300-3+1-R-L, order code 59.0911, T1+T2 AC Surge Protective Device SPD for 40 mm busbar

Raycap - ProTec ZPS T1H-300-3+1-R-L, order code 59.0911 pic2, T1+T2 AC Surge Protective Device SPD for 40 mm busbar

Citel:

  • Type 1+2+3 AC SPD for 40 mm busbar systems
  • Ultra fast and error-free mounting
  • Pluggable modules
  • VG Technology
  • In: 20 kA
  • Iimp: 12.5kA or 8 kA
  • Iimp total: 50 kA or 32 kA
  • No leakage current
  • Optimized to TOV
  • EN 61643-11 / IEC 61643-11 certified
  • UL1449 ed. 4 compliance
  • VDE-AR-N 4100 compliance (use of Type 1 overvoltage protection devices (SPD) in main power supply systems)

ZPAC1-13VG-31-275
ZPAC1-8VG-31-275

Citel ZPAC1-13VG-31-275 pic1, T1+T2 AC Surge Protective Device SPD for 40 mm busbar

Citel ZPAC1-13VG-31-275 pic2, T1+T2 AC Surge Protective Device SPD for 40 mm busbar