BS EN 61643-31: 2019

-Ananan na'urorin ƙarfin kariya

Sashe na 31: Abubuwan buƙatu da hanyoyin gwaji don SPDs don shigarwar hoto

Maganar ƙasar

Wannan Tsarin Burtaniya shine aiwatar da Burtaniya na EN 61643-31: 2019.
An samo shi daga IEC 61643-31: 2018. Ya birkice
BS EN 50539-11: 2013 + A1: 2014, wanda aka janye.

An aiwatar da sauye-sauye gama gari na CENELEC a wuraren da suka dace a cikin rubutun. Ana nuna farawa da ƙarewar kowane gyare-gyare na yau da kullun a cikin rubutun ta alamun C.

Bugar Burtaniya cikin shirye-shiryenta an damka wa Kwamitin Fasaha PEL / 37/1, Masu Ruwa da Kama - Volananan Ragewa.

Jerin kungiyoyin da aka wakilta a wannan kwamitin za a iya samun su bisa bukatar sakataren sa.

Wannan ɗaba'ar ba ta da'awar haɗawa da duk abubuwan da ake buƙata na kwangila. Masu amfani suna da alhaki don aikinsa daidai.

Standa'idodin Ka'idodin Biritaniya 2019
An buga ta BSI Standards Limited 2019

ISBN 978 0 580 87525 0

ICS 29.120.50

Yin aiki tare da Tsarin Burtaniya ba zai iya ba da kariya daga wajibai na doka ba.

An buga wannan Daidaitaccen Burtaniya a ƙarƙashin ikon Tsarin Manufofin Manufofin da Dabarun a kan 30 Nuwamba Nuwamba 2019.

Turawan Turai

Rubutun daftarin aiki 37A / 306 / FDIS, bugu na 1 na IEC 61643-31, wanda SC 37A ta shirya: "devicesananan na'urori masu kariya daga wutar lantarki" na IEC / TC 37: "An kama masu ƙara" zuwa ga daidaiton IEC-CENELEC jefa kuri'a kuma CENELEC ta amince dashi azaman EN 61643-31: 2019.

Wani daftarin gyara, wanda ya shafi sauye-sauye na yau da kullun zuwa IEC 61643-31, an shirya shi ta CLC / TC 37A "devicesananan na'urori masu kariya daga tashin hankali" kuma CENELEC ta amince da shi.

Kwanan kwanakin nan an ƙayyade

· Kwanan wata wanda wannan takaddar (dop) 2019-11-03
dole ne a aiwatar dashi a kasar
matakin ta hanyar buga wata alama
matsayin ƙasa ko ta yarda

· Kwanan wata kwanan wata wanda ƙasa (dow) 2022-05-03
matsayin saba wa wannan
dole ne a cire takaddar

EN 61643-31: 2019 ya cika EN 50539-11: 2013.

Jumloli, ƙaramin ƙaramin bayani, bayanan lura, tebur, adadi da ragi waɗanda ƙari ne ga waɗanda ke cikin IEC 61643-31: 2019 an tsara su ne da “Z”.

EN 61643-31: 2019 ya haɗa da canje-canje masu mahimmanci na fasaha masu zuwa game da EN 50539-11: 2013: Hakan ya haɗa da quidance don tabbatar da daidaito don samfuran da aka riga aka gwada bisa EN 50539-11: 2013

Babban canje-canje game da EN 50539-11: 2013 shine cikakken sakewa da haɓaka hanyoyin gwajin da jerin gwajin.

An ja hankali ga yiwuwar wasu abubuwa na wannan takaddun na iya zama batun haƙƙin haƙƙin mallaka. CENELEC ba za ta ɗauki alhakin gano wani ko duk irin haƙƙin haƙƙin mallaka ba.

An shirya wannan takaddun a ƙarƙashin umarnin da Hukumar Tarayyar Turai da Tradeungiyar Ciniki ta Europeanasashen Turai suka ba CENELEC, kuma suna tallafawa muhimman bukatun EU Directive (s).

Don ationhip tare da EU Directive (s) duba ƙarin bayani game Annex ZZ, wanda shine ɓangare na wannan takaddar.