AC & PV Surge protection device SPD for PCB mounting

Home>>Surge Protection Devices>>AC & PV Surge protection device SPD for PCB mounting

AC & PV Surge protection device SPD for PCB mounting


Adaptable Base to PCB for Surge Protection Device SPD plug-in cartridge, 1pole, 230Vac, 275Vac, 1000Vdc, 1500Vdc, for AC and DC PV photovoltaic applications with remote indication.

AC and DC PV Type 2, Type 1+2 surge protective device for PCB mounting.

Surge protection for PCB mounting / plug-in surge protection device SPD for PCB.

Dehn – Surge protection for PCB mounting:

Dehn - SPD for PCB mounting
Dehn - Surge protection for PCB mounting
Dehn - Adaptable Base to PCB for Surge Protection Device SPD plug-in cartridge
Diagram - Surge Protection Device SPD for PCB mounting

Mersen – plug-in surge protection device SPD for PCB:

Mersen - plug-in surge protection device SPD for PCB
Mersen - plug-in surge protection device SPD for PCB installation
Mersen - Adaptable Base to PCB for Surge Protection Device SPD plug-in cartridge

Citel – surge protective device for PCB mounting:

Citel - surge protective device for PCB mounting

Phoenix – Surge protection for PCB mounting:

Surge protection for photovoltaic systems, for space-saving PCB installation
Phoenix - Surge protection for PCB mounting
Surge protection for photovoltaic systems - optimum protection with the lowest space requirements
Phoenix - Adaptable Base to PCB for Surge Protection Device SPD plug-in cartridge

CPT – SPD for PCB installation:

CPT - Adaptable Base to PCB for Surge Protection Device SPD plug-in cartridge

Surge protector requirements of PV inverter manufactures have evolved. To save the space in the cabinets, they have decided to replace DIN rail SPD by mounted SPDs: these ones are designed to be mounted directly inside the inverter, soldered on the internal PCB.

To comply this new request, LSP has developed two dedicated product ranges : PAC and PPV. PAC and PPV is the series of socket bases that allow for integration of LSP’s pluggable IEC/EN surge protection cartridges (Class II / Type 2) directly on printed circuit boards. Those socket bases are suitable for all kind applications and any network configuration. Integration of surge protection on PCBs is often planned for at an early stage of development of the system.

PPV range is designed to protect the DC side of photovoltaic inverters. The single pole module must be soldered on a PCB, in parallel on the DC network.

  • Optimal solution for the industry of power electronics: inverters, converters, control panels for railway, PV combiner boxes, machines, OEM equipment, etc.
  • Single pole socket for all networks configurations: TNS, TT, TNC, IT, “Y”PV and MPPTs
  • Type 1+2 surge protector (Iimp: 6.25kA, Ucpv up to 1500 Vdc)
  • Type 2 (Imax: 40 or 25 kA, Ucpv up to 1500 Vdc)
  • Remote and visual indication of protection device life status.
  • EN 50539-11:2013 (EN 61643-31:2019) and IEC 61643-31:2018 compliance
  • Cost and space saving

PAC range is designed to protect the AC side of photovoltaic inverters. The single pole module must be soldered directly on the PCB, in parallel on the AC network.

  • Single pole socket for all networks configurations: TNS, TT, TNC, IT
  • Uc: 420 Vac or 850 Vac
  • Imax: 10 or 20 kA
  • Remote and visual indication of protection device life status.
  • EN 61643-11:2012 and IEC 61643-11:2011
  • Cost and space saving
shares
back to top