FLP7-DC75/2S

Home>>DC SPDs>>DC SPDs Type 1+2>>FLP7-DC75/2S

Project Description

FLP7-DC75/2S


Description

Pluggable modular multi-pole PV SPD type 1 and type 2 lightning current surge arrester for use in photovoltaic systems

  • With remote signaling contact for monitoring device (floating changeover contact) (S)
  • For installation in the DC circuits of solar photovoltaic systems, string box, inverter
  • Mode of Protection: (DC+) – PE, (DC-) – PE, (DC+) – (DC-)
  • Surge Ratings: Iimp= up to 7 kA (10/350μs)
  • EU Category: Type 1+2
  • Protective Elements: High Energy MOV
TypeFLP7-DC75/2FLP7-DC75/2S
SPD according to EN 61643-11 / IEC 61643-11type 1 + type 2 / class I + class IItype 1 + type 2 / class I + class II
Nominal d.c. voltage Un48 V48 V
Max. continuous operating d.c. voltage Uc75 V75 V
Lightning impulse current (10/350μs) Iimp7 kA7 kA
Nominal discharge current (8/20μs) In20 kA20 kA
Maximum discharge current (8/20μs) Imax40 kA40 kA
Voltage protection levelUP0,3 kV0,3 kV
Residual current – Leakage current at Uc[IPE]< 0.1 mA< 0.1 mA
Max. Load current if connection series IL20 A20 A
Response time tA25 ns25 ns
Range of operating temperatures (TU)-40/+80°C-40/+80°C
Operating state / fault indicationgreen / redgreen / red
Number of ports11
Cross-sectional area (min.)1.5 mm2 solid /flexible1.5 mm2 solid /flexible
Cross-sectional area (max.)35 mm2 stranded / 25 mm2 flexible35 mm2 stranded / 25 mm2 flexible
For mounting on35 mm DIN rail acc. to EN 6071535 mm DIN rail acc. to EN 60715
Enclosure materialthermoplasticthermoplastic
Place of installationindoor installationindoor installation
Degree of protectionIP 20IP 20
Capacity2 module(s), DIN 438802 module(s), DIN 43880
ApprovalsCECE
Type of remote signalling contactchangeover contact
a.c. switching capacity250V / 0.5 A
d.c. switching capacity250V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminalsmax. 1.5 mm2 solid / flexible

Dimensions-and-Basic-circuit-diagram-SPD-FLP7-DC75-2S

back to top